We are looking for agents/dealers worldwide. Kindly drop us a mail for further discussions.

Elmec Speciality, Hot Runner Controllers are efficient and economical. Our Multi zone Hot runner Controllers are manufacture by assembling single temperature control modules . Thyristor controlled outputs to control Hot runner Heaters & Manifold Heaters are available.


Press SET and MODE key together for 2 seconds, top line displays "SoFt", lower line displays "ON" or "oFF", press up or down key to change status.

When soft start status is on the temperature is lower than 93 C  (199.4 F), soft start heating is activated. 

The power is limited to 10% of the nominal power for duration of 60 seconds, then add 5% each time.


  • Advanced P I D Control algorithm
  • Maximum output power per zone : 3600 watts
  • Supply Volts : 230v / 415v - 3 Phase
  • Dual Display: Set point and actual temperature
  • Thermocouple input : Universal Type
  • Temperature display : oC (or) oF selectable
  • Output : SSR / Thyristor


  • Temperature control mode: Adjust with multiple algorithms
  • Protection function against short circuit / open circuit; alarm in case of thermocouple failure
  • Thermocouple sensor type J and type K are interchangeable
  • Soft-start avoids current leakage arising from moisture.
  • Automatic and manual heating are available
  • Power: AC185V-245V,50/60HZ
  • Temperature precision: 0.1 ℃
  • Temperature resolution: 0.1 ℃
  • Temperature stability: ±0.5 ℃ (ambient temperature: -10~50 ℃)
  • Control temperature range: 50 ℃ ~ 550 ℃
  • Load: 16A, 100W~3600W
Thermocouple Calibration Accuracy  0.1℃
Control Accuracy  ±0.3℃ from Set point
Control Algorithm  PID, Auto Tuning
Manual Mode  Power Compensation for incoming Voltage variation (0 ~ 65%)
Temperature Control Range  50 ℃  ~ 550 ℃ 
Power Output Range  15 Amp/zone (3600W/Zone)
StandBy Temperature  User Selectable (30~500℃)
Boost Mode  1~99min. 0~65% output
Thermocouple wire type  Type J or Type K
Cold Junction Compensation  Internal to enclosure
External Resistance  10Meg. Ohms
Temperature Variation  Due to T/C Length None
Input Voltage  AC185V-245V, 50/60HZ
Operation Conditions  0 ~ 50 ℃ UP to 90% humidity (Non-Condensing)
Load  16A, 100W - 3600W each zone
Output type  PWM (Pulse-Width Modulation), SSR (Solid-State)
Temperature Control type  FUZZY + PIDD artificial intelligence + shift-phase control
Soft-start  Avoid current leakage arising from moisture